Your Best Choice for Plumbing and Furnace Repair in Bellingham and Sudden Valley, WA (10)

I was called to replace an old gas water heater that was not producing efficiently or effectively. I arrived on-site and immediately began the replacement process, ensuring that the new unit was properly installed and functioning correctly. The job was completed in a single day, and the customer was very satisfied with the results.

I was called to clear a main line clog and install a clean out for easy access to clear any future clogs.

I repaired a broken main sewer line, spot replaced sections, and repaired the concrete patch.

I repaired a shower diverter that was not working properly.

Water leak repairs. When you get leaks, call the plumber near you at LaVergne's Plumbing. Copper water line.

Burst outdoor faucet replacement. When you need a plumber, call us! We offer same day service at LaVergne's Plumbing and Heating. Woodford frost free and anti siphon faucet.

Leaking toilet - minor bathroom repipe with pex lines and new shut off valves. We are your full service professional plumber at LaVergne's Plumbing and Heating. When you want the best!

Is your sewer pump not working and in need of replacement? Call our professional plumbers to restore your facilities and prevent any inconvenience throughout the day. LaVergne Plumbing, your plumber nearby!

Let us crawl under your house and do the dirty work! Leave the spiders to us. Leak detection and repairs done professionally with a smile at LaVergne's Plumbing and Heating.

I was called to a house that had a cracked manifold and a flooded well house. I replaced the cracked manifold and repaired the well house. The house is now up and running.

New and much improved yard hydrant installation. Out with the old leaking one and in with a new woodford frost free!

We specialize in installing and hooking up gas lines for all your summer BBQ needs. We can also handle any other gas work you may need. Call us today for a free estimate!

I changed out the filters for a well pump.

I was called to repair an older tub diverter that was not shutting off. I was able to provide emergency service repairs to the tub diverter.

I was called to replace a faulty heater in a customer's home. I arrived on time and quickly diagnosed the issue. I replaced the faulty heater with a new one and tested it to ensure it was working properly.

I was called to clear a clogged storm drain in a residential area. I used a specialized tool to break up the clog and clear the drain.

I repaired the septic tank lid, replaced the risers, and resealed the tank. I also exposed the secondary tank lid but had to stop due to a visual inspection. The main tank lid needs a new gasket. I will do a structural inspection before sealing the tank.

I replaced the water heater and repaired the pressure tank issue with the Wells system. The client needs time to consider his options before making decisions. The pressure tank work is in progress

You wake up from a long weekend off, only to find out that your shower is leaking! Ughhh, what do you do? You get on the phone and call your full-service professional plumber at LaVergne’s Plumbing and Heating. Our experienced team is ready to tackle any plumbing issue, ensuring quick and efficient solutions. When you want the best, trust LaVergne’s Plumbing and Heating to get the job done right! The plumber nearby..

After a long weekend our Plumbers are right back at it and fixing a leaky kitchen sink and completely renovating the piping underneath for our customers. If you need reliable plumbing services, call LaVergne Plumbing today!

Meet your superhero plumbers at LaVergne's Plumbing and Heating! We specialize in unclogging slow drains and resolving sewer problems swiftly and efficiently. Our expert team is ready to tackle any plumbing challenge, restoring your system to perfect working order. For unbeatable service and superhero skills, call LaVergne's Plumbing and Heating today!

What do you do when in the middle of the night your hot water tank starts leaking? You call a professional so the nightmares go away to replace your gas hot water heater. Call your nearby Plumber at LaVergne Plumbing & Heating today to get services today!

I recently completed a job for a customer in need of Aquasana system maintenance and repair. I assessed the system, identified the issues, and made the necessary repairs to ensure optimal performance.

I replaced a leaking dishwasher shut-off valve for a customer. The valve was old and worn out, causing water to leak from under the sink. I removed the old valve and installed a new one, properly sealing it to prevent future leaks. The customer was pleased with the job and the new, reliable shut-off valve.

We can give you peace of mind! A home inspection on a pending house sale revealed some additional plumbing concerns. We came out and did a full inspection and offer long-term solutions for every repair needed.

I recently completed a job for a commercial business with a clogged drain. I used a Spartan auger to remove the clog and inspected the entire system to check for any other issues.

We are your full-service emergency local plumber! Today, we successfully cleared a main line clog with hydro jetting, inspected the pipes with a camera, and did a partial repipe. Our team is dedicated to providing quality plumbing services to keep your home or business running smoothly!

Today, we worked on a bathroom remodel. We had to move all the plumbing in the bathroom and install new upgraded plumbing. We also had to install new tiles and paint the walls. It was a lot of work, but the end result will be worth it.

I recently completed a job repairing a burst pipe on a well pump. The customer had reported that their water pressure had significantly decreased, and upon further investigation, we discovered that the well pump's pressure tank had burst, causing water to leak from the tank and into the surrounding area. We quickly shut off the water supply and removed the damaged pressure tank. We then installed a new pressure tank and tested the system to ensure it was working properly. The customer was pleased with the quick and efficient repair, and we were able to restore their water pressure within a few hours.

I recently replaced an old, worn-out outside faucet for a homeowner and also repaired a small copper water line leak. The new faucet was installed quickly and efficiently, and the water line leak was fixed with great care and attention to detail. The customer was very pleased with the results and the job was completed to their satisfaction.

I removed some dripping piping no longer in service from the mechanical room and capped it off in the crawl. I installed a pressure reducing valve in the crawl. I dug up a waterline in the yard and replaced a handyman repair and cut out flattened copper and replaced it with PEX. I installed an escutcheon in the guest bath and sealed floor penetrations.

I arrived at a shower valve job where the customer's head parts were not correct. I had to go to page 2 to find the correct parts. I was able to find them locally and complete the job. Myrna will handle the payment processing. I paused the job and am ready to close it out.

I recently completed a job repairing a main water line leak. I first tested the water to determine the source of the leak. Once I found the leak, I dug up the area around the leak and repaired the pipe. I then tested the water again to ensure the leak was fixed. Finally, I cleaned up the area.

We recently completed a job repairing a main water line leak with concrete patch repair. We provide all services for all plumbing needs.

I recently completed a job at a customer's home where they were experiencing low water pressure. After checking the water pressure, I discovered that the vacuum breaker on the hose bib was malfunctioning. I recommended installing a pressure reducing valve (PRV) to solve the problem. The customer chose a bandaid PRV installation and I went to the shop to get the necessary equipment. Upon my return, I installed the new PRV and removed the old one. After restoring water pressure to the home, I adjusted the pressure to 65 psi and found no leaks.

I was called to a home to check the well pump. Upon arrival, I found that there was no power to the well pump. I checked the breaker and found that it had tripped. I reset the breaker and tested the well pump, which now had power. No further work was performed at this time.

I returned to a customer's home to perform jetting as discussed. I decided to leave the piping as is for now. This time, the kitchen and lavatory, which are back to back, were backing up. I removed both traps and sent the jetter hose down. I had to clamp it down and place a bucket underneath to safely get the jetter going, as it was tough at a certain point to advance the jetter. I ran the jetter down the tailpiece in the kitchen sink and after a couple of feet, I got it to take water. I could feel the equipment but through some kind of blockage. Once I got the drain to take high-pressure water, I ran it a couple of times to make sure it gets cleaned out. Once I jetted the kitchen sink, I removed the lavatory trap and ran the jetter on that side of the wall just for good measure. Both sides were taking water. I ran both faucets simultaneously f

I arrived at the customer's home to install a lavatory sink and faucet. I turned off the water to the home and drained the system. I replaced the cutoffs under the sink and turned the water back on. I installed the faucet, sink, pop-up, supply lines, and p-trap. I performed performance and safety testing. The customer had additional issues with two leaking hose bibbs. I discussed the concerns and presented options for replacement. The customer chose to replace the hose bibbs. I turned off the water and drained the system. I cut out one hose bibb and removed the solder from the other. I replaced the hose bibbs and turned the water back on. I performed performance and safety testing. No further work was required.

I tightened a loose shower arm and gave a ballpark price to move the main line clean out. The customer would like to schedule it out a couple weeks.

I replaced a toilet with a new toto drake, installed new wax rings and bolts, and replaced two toilet angle stops in each upstairs bathroom. I repaired a leaking section of piping in the area where I did demo the week before and installed a new 3/4 caleffi prv with a new 3/4 shutoff valve. I tested for leaks and performance, and everything was working well with no leaks.

I recently completed a job as a highly skilled HVAC contractor to clear out a clogged basement drain. I used my expertise to identify the problem, use specialized tools to clear the blockage, and ensure the drain was functioning properly. The customer was thrilled with the results and expressed gratitude for my professionalism and attention to detail.

I recently completed a home service job where I diagnosed, tested, and provided options for repairing a well pump's electrical system. I assessed the problem, identified the necessary components, and made recommendations for repairs or replacements. I also provided information on maintaining well pumps and troubleshooting common issues.

Return trip to a customer's house due to high water pressure. It was first noticed after we installed a new main water line from the meter to the crawl space. Cut out a small section of copper right after the PEX we installed. Installed a pressure reducing valve (prv) due to the customer not having one previously on her home. Got the new one all pressed in and set the pressure to around 68psi. Performance and safety testing and leak detection completed.

I came back to install an BN escutcheon plate. I discussed concerns with the customer and showed options. The customer upgraded to the bronze option. I replaced the chrome escutcheon plate, tub spout/diverter, shower arm, shower arm escutcheon, and shower head with new BN pieces. I performed performance and safety testing to ensure the diverter was properly sending water to the shower head.

I was called to a customer's house to remove a small toy that was lodged inside the toilet. After assessing the situation, I decided to use an auger, which is a specialized tool that dislodges clogs. After using the auger, I was able to remove the toy from the toilet. I then tested the toilet to ensure it was functioning properly with and without toilet paper, and it successfully flushed every time.